In the first place, don’t hurry to install the light after the purchasing of led light. On the contrary, you should read the mark of led light and operating instruction, and install and use led lights according to instruction book or it may bring dangers. Secondly, change the aged led lighting tubes in time on the basis of light source parameter offered by mark. And the tube should be changed in time when two ends of tube become red, tube becomes black and light tube cannot be lightened to prevent the unsafe phenomenon of ballast's burnout. Thirdly, do not change the structure of led light in the process of clean, nor change the components of led lights informally. At the end of clean and maintenance, led light should be installed according to its original style without the neglected loading or misloading of led components. Fourthly, do not switch led light frequently, because at the moment of frequent starts, the current goes through filament is bigger than the working current which makes the temperature go high and accelerate, in order to reduce its working life, therefore we should reduce the switch of led light. Fifthly, maintenance should be strengthened to prolong its working life. And the T8 LED Light Tube in the room should be wiped in regular time, and pay attention to prevent the invading of moisture, in case of the phenomenon of rust, erosion, creepage and short circuit. The lights installed in toilet or bathroom should be added moistureproof shade, or its working life will be shortened greatly. We should also prevent the oil and smoke in the kitchen. Led light can be wiped by wet cloth to avoid dust and dirt.
Dissipation of LED Chip
There are three important points in led chip dissipation: the whole contact, high-efficient conduction and rapid emission. The whole contact refers to led chip contacts with radiator support high-efficient conduction refers to take various design to conduct heat efficiently to heat sink. From the tread of technology development, ceramics is a kind of prospect material. Rapid emission refers to heat sink can send out the heat at high speed. It is not convenient to take liquid cooling, while natural air cooling and fan air cooling are more suitable.
Notices
Moisture will make led rust and painting peel off, and it can also shorten led light's shelf life. Therefore, moisture proof plays an important role in lights maintenance, especially the lights in toilet, bathroom and kitchen. We had better not clean led light by water instead wiping by little wet cloth, and we should keep in mind that do not wipe the light when the light is on.
The article is come from:http://www.mobilesaccessories.net/index.php/maintenance-of-led-light.htm